Spillzorbe is a clean, fast acting, environmentally safe absorbent, which has passed each state’s individual landfill regulations. Even when the Spillzorbe has absorbed the liquid it is still classed as non-dangerous/hazardous due to the quality of the non-leaching properties of the mineral. It has also passed Worksafe Australia and Dangerous Goods standards. Up to 50kg can be disposed of in domestic waste. Over 50kg must be disposed of in accordance with local, state and federal landfill regulations.
Available in 2.5kg and 10kg Bags.
Other absorbents on the market will claim that they are re-useable. This is because the absorbents will continue to absorb liquids if they are not fully saturated. There is a major safety issue particularly where caustic and flammable products are present.
Spillzorbe in it’s raw state will not sustain a flame (Unless fuel vapour is present).
Spillzorbe is also a vapour, odour and moisture absorbent. It is fantastic for use with BBQ’S as it will prevent flare ups, which occur with sand and also keep the mosquitoes and midges at bay. As a moisture absorbent it is ideal for use in fridges, especially bait fridges. It can be used anywhere with damp or condensation problems.
Key Features
Unlike many other granular and powder absorbents, Spillzorbe has unique active characteristics.
- Absorbs liquids, gases and odours.
- High cation exchange capacity.
- Natural bonding action of Zeolite makes it far more active in the absorption and adsorptionprocess.
- All natural heat sterilised mineral – contains no chemicals.
- Particle size gradation designed to maximise surface area
- Absorption efficacy.
- Maintains strength integrity when fully absorbed.
- Reduces slippage and makes clean-up easy. Strong wicking action to pull spills from thesurfaceAreas of current use for Zeolite
Industry
Zeolite can be used to clean liquid spills such as oils, fuels, mild acids and alkalis, and various other organic toxins. Gases such as formaldehyde and hydrogen sulphide have been shown to be absorbed by Zeolite. Zeolite has been tested to TCLP and Paint Filter Standards and meets EPA landfill disposal requirements.
Types of industry
Councils, Warehouses, Workshops, Mines Sites, Construction Sites, Transport Companies, Waste Disposal Companies, Waste Bins, Liquid Storage & Transport.
Clean up procedure
Spread the Spillzorbe around the perimeter of the spill to contain the spill. Then work the Spill- zorbe in from the edges towards the centre of the spill until no free liquid is visible. Dispose of the absorbent and contained liquid in accordance with local, state and federal authorities. Some other companies may claim that as their products are biodegradable you can leave them on the side of the road. It is against the law to litter or to leave additional material after a spill or clean up. Therefore by leaving an absorbent product, whether it is biodegradable or not you are breaking the law.
- HZFSVSZ025 – 2.5kg Bag
- HZFSVSZ100 – 10kg Bag
