• HAZMAT


    Specialist protective clothing, spill containment, decontamination and training for all hazards.
  • MARINE SAFETY


    Safety solutions for going to sea or cruising on the river.
  • AVIATION FIRE RESCUE


    Equipment to keep you safe on the ground or in the air.
  • FIRE PROTECTION


    Specialist fire protection equipment for at home or in the workplace.
  • RESCUE EQUIPMENT


    The best tools for the job when lives count on it.
  • FLOOD MITIGATION


    Protect your livelihood and assets from flood waters.
  • SPECIAL – Holmatro Rescue Gear


    Have a look at our range of Holmatro rescue tools

BlazeCut T Series for Electrical Enclosures



Product Details

BlazeCut “T” Series system is a simple and cost effective fire protection of small enclosures. The system consists of a heat sensitive tube made of special plastic which is closed by a stainless steel fitting on each end. The tube has both storage and detection function which means that the extinguishing agent is stored directly in the tube and no additional storage device like cylinder is needed.

The BlazeCut system uses HFC-227ea which is an extremely effective, clean and people-safe extinguishing medium for electrical fires.

BlazeCut system operates automatically independent of any power supply by detecting higher temperatures. When the temperature in the protected enclosure rises to a critical threshold, the detection tube melts down at the point where the affecting temperature is the highest. Melting the tube creates a hole releasing the entire extinguishing agent stored in the tube onto the source of the fire.

BlazeCut “T” Series systems are supplied in various lengths of the tube and volumes of agent. The standard volume of agent ranges from 0,25 kg to 1,0 kg, which is sufficient to protect enclosures with volume between 0,25 m3 and 1,00 m3 respectively.

 

 

Small electrical spaces such as electrical cabinets, fuse boxes, audio-video equipment or racks can be found in every household, office or industrial building. Each of these small spaces poses a threat to the surrounding equipment and the building itself due to increased risk of fire.

 

BlazeCut “T” Series systems effectively protect these electrical spaces and stop the fire from spreading outside of the protected enclosure whereby preventing severe damage and losses.

The size of the enclosure is usually the sole limitation of use. Typical application includes but is not limited to:

  • Electrical cabinets
  • Fuse boxes
  • Racks
  • Audio-video equipment
  • Battery spaces
  • Network and cable installations

Advantages of BlazeCut T Series

  • ZCFSSTD1EA – 1m Length
  • ZCFSSTD1ES – 1m Length with integrated pressure switch
  • ZCFSSTD2EA – 2m Length
  • ZCFSSTD2ES – 2m Length with integrated pressure switch
  • ZCFSSTD3EA – 3m Length
  • ZCFSSTD3ES – 3m Length with integrated pressure switch
  • ZCFSSTD4EA – 4m Length
  • ZCFSSTD4ES – 4m Length with integrated pressure switch