Requirements for testing of smoke detectors vary by country, the common need is for a functional test where smoke, or simulated smoke, is introduced through the vents of the detector to the sensor.
Functional testing is required by all national standards around the world, including BS: 5839, DIN 14675 and NFPA 72. A functional test should be carried out using an appropriate test tool which is designed for purpose and will cause no damage to the detector under test.
There are now two products within the Solo range that allow functional testing of smoke detectors – both of which are approved by leading detector manufacturers.
Fundamental to functional smoke checking for many professionals around the world the Solo 330 contains the test aerosol and ensures that it is applied correctly and contained only where required. Used with the access poles it enables safe testing at heights but is equally valued at low level.
- Lightweight and simple to use
- Universal design suits widest range of detectors (up to 100mm / 4″ in diameter)
- Spring-loaded solution for suspended ceilings
- Transparent test cup for clear view of detector LED
- Swing frame for use at / from angles
- Outstanding quality backed by lifetime warranty*
- Detector manufacturer approved
- Solo 332 suitable for detectors up to 177mm / 7″ in diameter
